Gasket and Handle Replacement

Gasket Replacement

1. Remove the magnetic gasket (A) by starting on the upper corner and work your way down (Fig. 1).

2. To install a gasket, insert the lip around the inner edge of the gasket into the groove in the plastic on the back of the door (B), then press the dart on the back of the gasket into the plastic on the back of the door (C) (Fig. 2). (see door installation instructions)

Handle Replacement

1. Remove the back vinyl (X) as much as necessary to access the inner door rail (X), this will allow access to the handle mounting screws (C) (Fig. 1).

2. Reinstall the back vinyl.